CP501 CHECK PLUG |
MARTINDALE CP501 CHECK PLUG
The CP501 Check Plug is a fast and easy to use Socket Tester that ensures that 13A UK sockets are wired correctly as, indicated by all three high brightness, long life neon's illuminating. Potential faults are indicated by one or more neon's failing to light. This failsafe system means that any neon not lit indicates a problem! A great Socket tester!
The Martindale CP501 check plug is fitted with a flame retardant ABS case with a sculpted shape for easy removal. The CP501 Check Plug induces less than 5mA of earth leakage, well below RCD trip thresholds. As with all socket testers the CP501 only verifies the presence of an earth, it does not assess its quality. See the NEW Martindale E-Ze Check Xtra™ earth loop impedance socket tester below for verification of earth loop impedance.
|
Code: CP501
ONLY
£11.95 per tester
Code: CP511
Was £119.50
NOW ONLY
£99.95 for box of 10 CP501 testers
|
|
|
MARTINDALE BUZZ-IT CHECK PLUG
The Buzz-It 230V Check plug is a fast and easy way to ensure 13 Amp UK sockets are wired correctly in the same way as the CP501 check plug pictured and described above. As well as showing socket faults by the three neon indicators, the Buzz-IT Check plug also gives an audible signal when the wiring is correct. This allows for awkwardly placed, or not easily visible, sockets to be checked hassle-free. The Buzz-it socket tester can also be used as a basic fuse finder - when the correct fuse is pulled the audible signal on the buzzer stops.
|
Code: BZ101
Was £16.50
NOW ONLY £12.95
|
EZ150 CHECK PLUG |
MARTINDALE E-ZE CHECK XTRA EARTH LOOP IMPEDANCE SOCKET CHECKER
The only electrical UK Socket Tester measuring the earth loop impedance. Where conventional socket testers have the weakness that they only tell you if the earth is connected and not how safe it is, Martindale’s new T-Safe™ Technology gives safe, earth loop impedance checking within carefully selected bands without tripping the RCDs, a great time saver!
• Non-trip earth loop test
• Voltage test
• Socket test
• T-Safe™ technology
• Voltage warning
Like all other indicators this unit cannot detect common earth and neutral or earth neutral reversal
|
Code: EZ150A
Was £55.20
NOW ONLY
£44.95
|
CP301 CHECK PLUG |
MARTINDALE 110V CT INDUSTRIAL CHECK PLUG
Using LEDs to highlight possible fault
Using LEDs to highlight possible fault combinations, the CP301 is ideal for rapid socket checking in a factory or on site installations. Designed for use on 110V centre tapped circuits, it is fitted with a yellow 110V 16A CT plug to BS4343/IEC309.
The CP301 shows similar fail safe indications as the classic Martindale check plug.
|
Code: CP301
Was £29.95
NOW ONLY £27.95
|
CP201 CHECK PLUG |
MARTINDALE 250V INDUSTRIAL
CHECK PLUG
For factory and industrial maintenance, the 250V Industrial Check Plug (CP201) is fitted with a standard blue 250V 16A BS4343/ IEC309 plug (round 3 pin). Simply plug it into an compatible socket outlet and it will instantly identify whether or not the socket is correctly wired, in the same way as the classic check plug.
|
Code: CP201
Was £24.95
NOW ONLY £22.95
|
| |
PC101 CHECK PLUG |
MARTINDALE 3 PHASE INDUSTRIAL
CHECK PLUG
For 3-phase socket outlets, the PC101 will instantly prove connection of all three lines (or identify which are not connected) and show the sequence of phase rotation. Essential to ensure correct and safe running of three phase plant with motors going in the expected direction, This 3 Phase Check Plug is fitted with a red 16A, 3P+E, 4 pin BS4343/ IEC309 plug
|
Code: PC101
Was £59.95
NOW ONLY £49.95
|
EZ650 KIT
|
E-Ze CHECK XTRA PRO KIT
The E-Ze Check Xtra Professional Kit features an IEC socket with interchangeable 3 pin adaptor and TL88 3 way fused leads with croc clips.
Allowing you to test light fittings, distribution boards and terminal the E-Ze Check Xtra Kit uses the same revolutionary technology as the E-Ze Xtra Check Plug described and pictured above.
This Kit comes in a custom fitted lightweight protective case with carry handle.
Everything you will need for socket testing in one Kit ideal for electricians and maintenance staff.
|
Code: EZ650
Was £99.60
NOW ONLY £82.50
|
|
