Macrotest 5035 Electrical Tester Features
Insulation testing		250V, 500V, 1000V, 100V and 50V
Continuity tester
RCD tests		Test tripping times of RCD's
Loop Impedance Test		Check earth loop impedance values
No RCD trip Feature		Low test current
PSCC Calculation		calculates Prospective Short Circuit Current
Earth Testing		Comes with earth spikes & long leads for external earth testing
Phase sequence Indicator
Memory		stores test records
Download		to a PC or printers
Software		FREE Software to archive your tests

Part P Tester
and Part P Test Equipment

The new Macrotest 5035 Part P tester allows you to test and Certify electrical installations to the new Part P regulations.

It allows you to test and measure Continuity, Insulation, Global Earth values, RCDs tripping times, line and fault loop impedance measurement with prospective short circuit current calculation and, phase sequence indication. You can even store the test results with the built in memory, recall the electrical test results on the test instrument display and transfer these results to a serial printer or PC. The HT Italia Macrotest 5035 can test electrical installations to 16th edition (BS7671) and Part P wiring standards. Use the FREEl Eurolink 2000 management software to save and archive your Part P electrical installation test results.

Features: Macrotest 5035 Part P Tester

Continuity test of protection conductors, main and auxiliary potential equalising conductors with 200mA test current and 4-24 test voltage.
Insulation resistance measurement with a test voltage of 50V, 100V, 250V, 500V and 1000VDC.
Measures tripping times of RCDs type A, AC and selective.
Measures Contact voltage and Global Earth resistance value without RCD tripping.
Measurement of P-P, P-N short circuit impedance and prospective short circuit current calculation.
Measurement of fault loop short circuit impedance and prospective short circuit current calculation. High resolution impedance measurement (0.1 mOhm) with IMP57 optional accessory.
Measurement of fault loop short circuit Resistance with 15mA test current and prospective short circuit current calculation (this function allows to perform test without trip of 30mA or greater RCDs).
Measures earth resistance, 2, 3 and 4 wire and comes with earth spikes also ground resistance
Phase sequence indication.

HUGE SAVING!
WAS £899
NOW ONLY
£445
FREE software worth L80

FREE software worth £80 included plus FREE Calibration Certificate

For further information about keeping your tester calibrated please see Seaward Checkbox 16

What we include in the Macrotest 5035 Part P Tester price:

Other Test equipment we sell

1.	Macrotest 5035 Part P Tester
2.	Manufacturers Calibration Certificate
3.	Eurolink 2000 Downloading Software + Download Lead
4.	Carry Case with zipped pouches
5.	Earth Spikes and leads for external earth testing
6.	Test lead set
7.	Mains Lead for loop and RCD testing
8.	Instruction manual
9.	12 months manufacturers warranty

Supernova PAT Tester Kits Primetest 300
Europa PAT Tester
Europa PAT Tester Kits
Europa PAC Plus
Supernova XE
BenchPAT
PAT1000S
PAT500H
PAC500 Plus

* Prices excludes delivery carriage @ £10 and VAT @ 17.5%

PAT Training Services Limited
Glendales House
607 York Road
LEEDS
LS9 6NW UK

Tel: 0113 2489966
Fax: 0113 2484276
email admin@pat-training.co.uk

Part P Tester and Part P Test Equipment

Part P Tester
and Part P Test Equipment