Fast Check ! Metrel MI3000 Easi Plus Multifunction Tester
Continuity Test R1 & R2
Insulation
Complete RCD Auto Test
RCD Ramp Test
RCD Triplock
Loop, ZE, ZS
PSC, LE, LN
Phase Rotation
Polarity Test
Frequency Test
Downloading

PAT Training Services Limited
Glendales House
607 York Road
LEEDS
LS9 6NW UK

Tel: 0113 2489966
Fax: 0113 2484276
email admin@pat-training.co.uk

Metrel Easi Plus MI3000
Multifunction 17th Edition Tester

The Metrel Easi Plus MI3000 17th edition tester allows you to test and certify fixed electrical installation in compliance with the Part P, 17th Edition regulations, BS7671 and BS EN61557.
The Alphatek/Metrel Easi Plus MI3000 can perform a variety of electrical tests including: Continuity Testing, Insulation Testing, RCD testing including Ramp Test and a no RCD trip feature, Earth Loop impedance testing and PSC (prospective shirt circuit current. Basically all the tests you need to fully ensure safety within electrical installations in both commercial and domestic environments. Its an ideal electrical test meter for electricians installers and commisioning engineers.
The Metrel Easiplus has substantial capability of testing RCD's. The "all 6 in 1 visit" RCD testing mode makes it easy! Reset the breaker and the Easi Plus MI3000 will carry out all the tests needed. The RCD Ramp test will indicate actual trip current and the RCD Triplock feature will prevent any tripping of RCD's.
The Metrel MI300 Easi Plus Multifunction Tester is battery powered and comes supplied with a charger. Weighing less than 1.3kg, the Easi Plus has taken both speed of testing and portability into consideration.

Metrel MI3000 Easi Plus Part P 17th Edition Tester

Metrel MI3000 Easi Plus 17th Edition Part P Tester

Built in Charger System
Color Coded Switch for Easy Use
Small, Compact and weighs less than 1.3kg
Voltage Protected on ALL Ranges
Auto Power Off
3 Year Manufacturers Warranty
Supplied with Manufacturers Calibration Certificate
Meets Part P Requirements
Conforms to 17th Edition BS7671 and BS EN61557

IN STOCK NOW!
Was £595.00
Now Only
£335.00+ VAT

What we include with the Metrel Easi Plus:

1.	Metrel MI3000 Multifunction Tester
2.	13 Amp mains plug
3.	Test cable Universal connection 3 x 1,5 m
4.	Power supply adapter + 6 NiMH AA accus
5.	Test tip (blue, green, black)
6.	Alligator clip, 3 pcs (blue, green, black)
7.	Soft carrying neck belt
8.	Soft Metrel carrying bag
9.	Instruction manual on CD
10.	Handbook "Measurements on electric installations" on CD
11.	Calibration Certificate issued by the Manufacturer
12.	3 Years Manufacturers Warranty
Specifications:
Continuity Test: R1 & R2
Insulation Test:100V, 250V, 500V and 1000V
Insulation range up to 1000Mohms
RCD Auto Test: "All 6 in 1 Visit"
Loop, ZE, ZS, 110V, 230V and 415V
PSC (Measure the potential fault current between phase/neutral and earth/neutral conductors), LE and LN
Phase Rotation, Polarity Test, Frequency Test
Weight: 1,3kg - Dimensions: 23cm x 12cm x 9,5cm